Filter
Top Products
Network Configuration 31
The root password can be changed to allow you to configure the
printer by using a Web browser/TELNET/AdminManager. To change
the root password, select “Password Configuration” in the
Maintenance tab and follow the on-screen instructions.
Adjusting printer settings
The network addresses used in this manual are shown as examples
only. Network addresses used in your installation must be generated
from your own network.
1. Configure the IP Address, Subnet Mask and Gateway for the
network card. Launch the Web browser, enter the IP Address of
the network interface card in [Address (Location/Position)] and
press the [Enter] key. The Printer Status screen is displayed.
2. Select a tab and items to be changed in the left frame. You need
to log in as “root” to be able to configure all items. Non-root
users cannot configure all items.
3. To ensure correct operation, follow the procedure below for the
appropriate network browser.