Filter
Top Products
Appendix– E-Mail Alert Function 105
APPENDIX– E-MAIL ALERT FUNCTION
The following table explains how to set up the E-Mail Alert function via
Telnet.
7: Setup SMTP
(E-Mail)
1: SMTP Transmit Set sending E-Mail via SMTP,
enabled or disabled.
2: SMTP Receive Set receiving E-Mail via
SMTP, enabled or disabled.
3: SMTP Server
Name
Set IP address or host name
of SMTP server.
4: SMTP Port
Number
Set port number of SMTP.
5: E-mail Address Set the E-Mail address used
for [From] field in the mail
header.
6: Reply-To
Address
Set the E-Mail address used
for [Reply-To] field in the mail
header.
7: Destination
Address 1–
11: Destination
Address 5
1: To Address 1–5 Up to five E-Mail addresses to
which E-Mail alerts can be
sent.
2: Notify mode Select how to notify
warnings/errors via E-
Mail.When any specified
status changes, E-Mail is sent
immediately if "EVENT" is
selected, or periodically if
"PERIOD" is selected.
3: Check time (hours) Set duration (1-24 hours) to
send E-Mail when you select
"PERIOD" as Notify mode.