Filter
Top Products
UNIX 90
The network card logical directory structure is hierarchical. Move to the
logical directory; it is not possible to output print data to the root
directory.
2. Move to the preferable logical directory using the cd command.
Example: moving to the lp directory and confirming the current
directory.
ftp> cd /lp
250 Command OK.
ftp> pwd
257 ”/lp” is current directory
ftp>
3. Configure the transfer mode
There are two types of transfer mode: BINARY mode, in which the file
content is output as it is and ASCII mode, which converts the LF code
to the CR+LF code. If a binary file converted by the printer driver is
transferred, the transfer mode has to be BINARY mode.
Example: changing transfer mode to binary mode and verifying the
current mode
ftp> type binary
200 Type set to I.
ftp> type
Using binary mode to transfer files.
ftp>
4. Transfer the print data to the network card using the put
command. Two methods of file transfer using the put command
are available.
Example: transferring print data test.prn
ftp> put test.prn
Example: transferring print data specified by absolute path/users/
test/test.prn
ftp> put /users/test/test.prn /lp
5. Logout from the network card using the quit command
ftp> quit