Filter
Top Products
Network Configuration 8
Configuration utility
Available utilities
You can configure the network interface (NIC) by using one of the
following methods:
Utility Features System requirements
Quick Setup Configure the NIC easily and simply
without installing any software
packages into your system. You can
set the following:
Enable/disable TCP/IP, NetWare,
EtherTalk, NetBEUI protocols.
> Set IP address, Subnet Mask
and Gateway for TCP/IP
manually or by using DHCP.
> Set NetWare Mode and create
Queue/Print Server/Printer
objects.
> Zone name and Port name for
EtherTalk.
Windows95/98/Me/NT4.0/2000/
XP (TCP/IP protocol or IPX/SPX
protocol should be installed).
To create a NetWare queue,
NetWare Client 32 or IntranetWare
Client should be installed in your
system.
AdminManager Configure the NIC in detail. Windows95/98/Me/NT4.0/2000/
XP (TCP/IP protocol or IPX/SPX
protocol should be installed).
To create a NetWare queue,
NetWare Client 32 or IntranetWare
Client should be installed in your
system.
Web browser Configure the NIC and printer by
using a Web browser such as
Microsoft Internet browser or
Netscape Navigator.
Microsoft Internet Explorer Version
3.0 and higher or Netscape
Navigator Version 3.0 and higher.
Operating system that supports
Web browser.
TELNET Configure the NIC using TELNET. Third-party vendor developed
TELNET client package.
A TELNET Application is standard in
Windows/UNIX/Linux.
SNMP The printer and network card can be
controlled using third-party vendor
developed SNMP application.
Third-party vendor developed
SNMP application.