Filter
Top Products
Network Configuration 21
Printer Trap
Setup . . .
Detail . . . Off-line Set sending a Trap,
enabled or disabled,
when the printer turns
to OFF-LINE.
Paper Out Set sending a Trap,
enabled or disabled,
when paper is out.
Paper Jam Set sending a Trap,
enabled or disabled,
when a paper jam
occurs.
Cover Open Set sending a Trap,
enabled or disabled,
when the printer cover
opens.
Printer Error Set sending a Trap,
enabled or disabled,
when any errors occur.
IPX Set node address and network address to which
a Trap packet will be sent.
Detail . . . By selecting the button, the following dialogue
box is displayed:
In the dialogue box, the following items can be
configured:
Trap Enable Set sending a Trap
packet, enabled or
disabled, for each
destination.
Printer Reboot Set sending a Trap
packet, enabled or
disabled, when the
printer is rebooted.
Receive Illegal Set sending a Trap
packet, enabled or
disabled, when the
printer receives an
illegal Trap packet.
Location Comments