Filter
Top Products
Microline 1120 User’s Guide
11
Menus
The printer has an internal menu containing a number of default parameters
which can be set to enable your printer to match the parameters required by
your computer.
Entering the Menu Mode
To enter the Menu Mode, press SEL while turning on the printer.
Changing Menu Settings
1. Press SEL while turning on the printer.
2. Change settings:
a. Press SEL to select the relevant group that needs to be changed
(the group is the left-hand column on the Menu printout).
b. Press LF/FF to select the relevant item within the selected group
(the Item is the center column on the Menu printout).
c. Press LOAD/EJECT to cycle through the settings available for the
item you want to change (the settings are the right-hand column
on the Menu printout).
d. To continue making changes:
• press SEL for the next group
or
• press LF/FF for the next item.
3. Repeat the previous step until you are finished changing settings.
4. Hold down TEAR, then LOAD/EJECT, then LF/FF together to save the
changes you have made and exit the Menu Mode.
Important
Exiting the Menu Mode by turning off the printer will cancel any
changes you have made.