Filter
Top Products
Microline 1120 User’s Guide
36
17. Install the top cover assembly.
1120_bottomfeed_25.jpg
Step 2: Load Paper
Nota If using single-part forms, maximum paper weight is 18 lb.
(64 g/m
2
).
1. Make sure the printer is turned off.
2. Remove the top cover.
3. Move the paper lever—on the right side of the printer—toward the front
of the printer to the continuous forms symbol.
icon_forms.jpg
4. Place the stack of continuous forms paper below the printer. Bring the
paper up through the slot on the bottom of the printer.
5. Pull the lock levers on the sprocket wheels forward and open the
sprocket covers.
6. Adjust the wheels so the sprockets align with the holes in the
continuous forms you are using.