Filter
Top Products
Microline 1120 User’s Guide
39
Temporary TOF
Use the Control Panel
This TOF setting applies only to the sheet or continuous form loaded into the
printer when the setting is made. The next sheet or form feeds to the
selected default TOF.
1. With paper loaded in the print path, press SEL to put the printer offline.
2. Change the location of the first line of printing:
a. To move the TOF further down on the page (print paper advances
further into the printer):
– In 1/144-inch (0.18 mm) increments: press and hold LOAD/
EJECT, then press LF/FF.
– One line at a time: press LF/FF.
b. To move the TOF further up on the page (print paper retracts
further out of the printer):
– In 1/144-inch (0.18 mm) increments: press and hold the LOAD/
EJECT, then press LF/FF.
3. Press SEL to return the printer to the on-line state.
4. Send the print job.