Filter
Top Products
Microline 1120 User’s Guide
28
Loading Continuous Forms, Bottom Feed
This is a two-step process.
Step 1: Move the tractor assembly from rear feed to bottom feed.
Step 2: Load paper.
Step 1: Move the Tractor Assembly
1. Begin with the front of the printer facing you.
1120_cover_shot.jpg
2. Make sure the printer is turned off.
3. Disconnect the power cord.
4. Remove the Cover Access Assembly. Gently slide it back and up. Be
careful not to break the two tabs (1) at the front.
1120_bottomfeed_1.jpg
1