Oki 14i/n Printer User Manual


 
14 OKIPAGE 14ex, 14i, 14i/n
Paper
Paper and envelope types
The manufacturer of this printer recommends the fol-
lowing guidelines when selecting paper and envelopes
for use in your printer:
Paper and envelopes should be stored flat and
away from moisture, direct sunlight and heat
sources.
Use a smooth finished paper such as copier or
laser type paper with a Sheffield (smoothness)
rating of 250 or less. If in doubt, please ask your
paper supplier.
Use envelopes designed for use in laser type
printers.
The use of heavily laid or textured paper will
seriously impact on the life of the image drum
and give poor print quality.
Do not use very smooth, shiny/glossy paper.
Do not use heavily embossed headed paper.
Avoid printing on both sides and putting paper
through the printer twice.
Avoid using paper with perforations, cut outs and
ragged edges.
Do not use envelopes with windows or metal
clasps.
Do not use envelopes with self sealing flaps.
Avoid using damaged or curled envelopes.
Transparencies and adhesive labels
The manufacturer of this printer recommends the fol-
lowing guidelines when selecting transparencies and
adhesive labels for use in your printer:
Always use manual feed.
Always use rear output.
Media must be designed for use in laser printers
or photocopiers. Do not use media designed for
use in colour laser printers and photocopiers.
Must be able to withstand 200°C for 0.1 sec.
Labels should cover entire carrier sheet.
Carrier sheet or adhesive must not be exposed to
any part of the printer.