Filter
Top Products
16 OKIPAGE 14ex, 14i, 14i/n
Use the MEDIA TYPE setting in MENU 1 to adjust for
different thicknesses of paper. The following table
gives the range of paper weight for each media type.
Printing transparencies
When printing transparencies, the manual feed must be
used and the media type changed to transparencies as
follows:
CAUTION:
Damage to the printer may occur if the incorrect setting is
used when printing transparencies.
1. Select MANUAL FEED option under MEDIA
TYPE in MENU 1. Then select TRANSPR to
ensure the correct fusing temperature is set.
2. Open the manual feed on the printer and place the
transparency face up between the paper guides.
3. Adjust the paper guides to the width of the trans-
parency.
4. Select manual feed and correct paper size in the
software package being used.
Note: Remember to reset the printer and software for
normal paper after printing transparencies.
Heavyweight paper or cardstock
The normal paper path from a main paper tray to the top
output stack involves two complete U-turns. This may
sometimes cause very heavyweight paper or cardstock
to jam or misfeed.
Use the manual feed tray to feed this type of paper and
the rear paper exit to collect printed output. This gives
a nearly straight paper path through the machine and
may prove more reliable in this type of application.
Media Type Paper Weight
Heavy
105 to 122 g/m
2
Medium heavy
89 to 104 g/m
2
Medium
74 to 88 g/m
2
Medium light
67 to 73 g/m
2
Light
59 to 66 g/m
2