10 OKIPAGE 8w Lite
Image drum
When to replace image drum
As the image drum approaches its end of life, a Change
Drum message appears. Change the image drum when
the print quality becomes faint or begins to deteriorate.
Image drum life
The life of an image drum depends on a number of fac-
tors, including temperature and humidity, the type of
paper used, and the number of pages per job.
The image drum should last about 10,000 pages contin-
uous printing and up to 8,000 pages at 3 pages per job
(without power save). These numbers are approximate
because different number of pages are printed each time
and the environmental conditions and the paper type
used may vary.
Replacing image drum
1. Open the cover and remove the used image drum.
CAUTION:
Never expose the image drum unit to light for more than 5
minutes. Never expose the image drum unit to direct
sunlight. Always hold the image drum unit by the ends.
Never touch the surface of the green drum inside the image
drum unit.
2. Remove the new image drum from the package
and remove the protective sheet (1) from the
image drum (2).
3. Install the new image drum (1) into the printer
placing the alignment pins on each end into the
slots in the printer.
1
2