134
OKIPOS 425D
|
7 Basically, the concept of setting the printing area in the horizontal direction and the margins for Custom paper is the same
as for Slip, except for the following.
Custom Size is variable in width in the range of 162.56 mm (6.4") - 215.9 mm (8.5").
Validation’s paper setting position is different from that of Slip, and the minimum Right Margin value is 2.54 mm
(0.1").
Set paper size and margins within the specified range for your use.
Also, refer to 7.1 Setting Slip Paper in the Paper Tray.
The procedure for using Custom Size is explained below.
a) Set the length of paper to use in the Custom Size Setup dialog. (The width is constant at 162.56 mm (6.4").)
b) Open an application you want to use and customize your paper at Custom Size on the Page Setup menu.
c) Set the margins as needed within the specified range at Margins on the Page Setup menu.
d) Insert 101.6 mm (4.0")-wide paper to print.
Example
The left margin that is actually set up for using 101.6 mm (4.0") paper can be calculated according to the following formula .
[Width of Custom Paper Size fixed] - [Width of paper size actually used] + [Left margin for paper to be used]
162.56 mm (6.4") - 101.6 mm (4.0") + 2.54 mm (0.1")
Also, set the right margin at the minimum of 2.54 mm (0.1") or more.