Filter
Top Products
98
OKIPOS 425D
|
6.1.2 OKI Standard Model
6.1.2.1 Function Code
1 List of Function Codes
A25040.doc
No. HEX DEC CODE Remarks Print Start
1 0A 10 LF Print/line feed O
2 0C 12 FF Eject Cut Sheet paper or form-feed sprocket paper O
3 0D 13 CR Print/carriage return O
4 0F 15 SI Condense Designate X
5 12 18 DC2 Condense Clear X
6 18 24 CAN Cancel print data X
7 10 16 DLE Start DLE sequence
8 1B 27 ESC Start ESC sequence
9 1C 28 FS Start FS sequence
10 1D 29 GS Start GS sequence
11 1E 30 RS Journal Tab X
* Print Start Column
O : Command that invokes print start
X : Command that does not invoke print start
^ : Command that sometimes invokes print start
This applies hereafter.
DLE Sequence
1 Command recognition
A code that follows a DLE code is treated as a 7-bit code. (MSB=0)
For the parameters, which vary among the commands, see each command’s functions.
If a function code follows a DLE code, it is is treated as a stand-alone function code.
If DLE codes follow each other, they are treated as one DLE code.
Example: DLE DLE EOT n is treated as command DLE EOT n.
2 DLE sequences
A25040b.doc
No. HEX Command Sequence Functions Print Start
1 10 04 DLE EOT n Real-time status sending X
2 10 04 08 DLE EOT BS n Real-time MICR status sending X
3 10 05 DLE ENQ n Real-time request to Printer X