|
Developer’s Guide: English 135
7.3 Setting Tractor Paper in the Tractor Unit
This section describes how to set Tractor Paper in the Tractor Unit.
The maximum printable width per line with Tractor paper is 160.02 mm (6.3").
Push the Tractor Paper Guide against the Right Tractor Unit’s right edge when using this print driver. (Slide the Paper Guide
toward the left as needed to change the printing area on the paper.)
Basically, the concept of setting the printing area in the horizontal direction and the margins for Custom paper is the same as
for Slip.
Set paper size and margins within the specified range for your use.
Also, refer to “7.1 Setting Slip Paper in the Paper Tray.
7.4 Orientation
Orientation selections available with this printer driver are described next.
The printer driver switches the document orientation according to the setting made by the user.
When Landscape is designated, the driver rotates the direction 90° clockwise for printing. This rotation is done in Windows;
thus, the device font setting is disabled and replaced with the Windows font (True Type Font, etc. currently supported in
Windows.)
Printing direction for paper with Printing direction for paper with
its narrow side set first its wide side set first
O425_117.jpg
1 Orientation Landscape
2 Portrait
3 Paper feeds