Filter
Top Products
Quick Start
|
E-15
Connect to the Computer:
PC Systems
Parallel Port
Connection
!
For the best results, use a bi-directional parallel printer
cable marked IEEE 1284-compliant.
1 Printer and computer OFF.
2 Insert the connector, secure with the clips.
3 Connect to the computer; tighten the screws.
!
Be sure not to over-tighten the screws–this could damage
the screw posts on your computer.
4 Turn the printer and computer on.
Cable Requirements
To comply with FCC regulations, the cable must be
shielded with twisted pair conductors, and must be UL and
CSA approved.
Maximum length for standard bi-directional cable is 6 feet
(1.8 meters). For lengths greater than 6 feet, use a cable
marked IEEE 1284-compliant.
Printer connector is IEEE 1284-B receptacle (36 pins,
0.085" center line).
Port supports bi-directional IEEE 1284 communications
(compatibility, nibble, and ECP modes).