Filter
Top Products
Quick Start
|
E-33
Set the Emulation
The printer comes from the factory set to automatically
switch emulations, depending on what it detects in the
incoming data.
If you prefer, you can set the printer for a specific emulation
(HP
®
LaserJet
®
5 PCL5e
®
HP LaserJet 5 PCLXL Adobe
®
PostScript
®
Level 2 IBM
®
Proprinter
®
III XL, or Epson
®
FX).
For information on how to do this, see Select an Emulation
under Printer Menus in the Printer Control section of the
User’s Guide.
Print the Font Page
If you wish to print out a typeface list showing samples of the
resident fonts available for the various emulations:
1 Press ON LINE.
The printer goes off line.
2 Press and hold TRAY TYPE/Print Fonts until PRINT
FONTS appears on the display.
3 Press
ᮣᮣ
ᮣᮣ
ᮣ
/Reset until the emulation for which you wish to
print the font samples appears on the second line of the
display.
4 Press ENTER/Power Save.
The typeface list for the selected emulation prints.
5 Press ON LINE.
The printer goes back on line, ready to receive data.