Filter
Top Products
Quick Start
|
E-17
2 Insert the connector; secure with the screws.
3 Attach to the computer and tighten the screws.
!
Be sure not to over-tighten the screws–this could damage
the screw posts on your computer.
4 Turn the printer and computer on.
!
For Serial Interface pin assignments, see Interface in the
Specifications section of the User’s Guide.
Cable Requirements
Cable must be shielded with twisted pair conductors and
must be UL and CSA approved.
Maximum length for serial cable is 6 feet (1.8 meters).
Printer connector is Type 17LE-13250-27 (D4CC)
receptacle (25 pins).
Standard RS232-C Serial Menu Settings
Flow Control = DTR Hi
Baud Rate = 9600 Baud
Data Bits = 8 Bits
Parity = None
Min. Busy = 200 mSeconds
!
To change any of these settings, see Printer Menus in the
Printer Control section of the User’s Guide.