Filter
Top Products
26 Guide de l’utilisateur Microline 420/421
Entering and Exiting Menu Mode
To enter or exit the Menu Mode, hold SHIFT while pressing
SEL.
Resetting the Menu to the Factory Defaults
Note: Please print the current Menu Mode settings before you
reset or change them. This is the only way to have a
record of the settings.
To reset the Menu to the standard settings (factory defaults):
1 Turn the printer off.
2 Press
SEL + LF while turning the printer on.
Printing the Menu Settings
Printing the Current Menu Settings
1 Make sure paper is loaded in the printer.
2 Press and hold
SHIFT, then press SEL to enter the Menu
Mode.
3 Press
PRINT (PARK key).
Printing All Menu Settings
To print out a listing of the settings for all menu items,
regardless of the emulation selected or the accessories installed:
1 Make sure paper is loaded in the printer.
2 Press and hold
SHIFT, then press SEL to enter the Menu
Mode.
3 Press and hold
SHIFT, then press PRINT QUALITY.