Filter
Top Products
Preparation before Use
2-10 OPERATION GUIDE
Configuring Network (LAN Cable Connection)
The machine comes with the network interface as standard and supports
each protocol of TCP/IP, IPX/SPX, NetBEUI and AppleTalk, allowing
network printing on various platforms such as Windows, Macintosh, UNIX
and NetWare.
Setting TCP/IP (When Using Fixed IP Address)
Follow the steps below to set TCP/IP when fixed IP address is used. Make
sure that IP address is available by asking your network administrator to
obtain it in advance.
1
Press the System Menu key.
2
Press [System], [Change] of Network and then [Change] of TCP/IP.
3
Press [On] of TCP/
IP.
4
Press [Off] of DHCP.
5
Press [IP Address]
and enter IP address
using the numeric
keys.
System - TCP/IP
Use TCP/IP.
On
Off
Cancel OK
Status 10/5/2006 10:10
DHCP
On
Off IP Address
Subnet Mask
Default
Gateway
0.0.0.0
0.0.0.0
0.0.0.0
System - TCP/IP
Use TCP/IP.
On
Off
Cancel OK
Status 10/5/2006 10:10
DHCP
On
Off IP Address
Subnet Mask
Default
Gateway
192.168.1.150
0.0.0.0
0.0.0.0