Filter
Top Products
PG L26/PG L26 Special User’s Guide – Installing options > 86
I
NSTALLING
OPTIONS
The following options are available to extend the performance of
your printer:
> 10/100 BASE-TX Network Interface Card: to make the
PG L26 and PG L26 Special network compatible
> 16, 32, 64, 128, 256MB RAM DIMM: to extend the main
memory of your printer and speed up the processing of
large files
> RS232C Card: to provide serial interface capability for the
PG L26 and PG L26 Special
> Second paper tray: to increase your printer’s paper
handling capacity by 500 sheets (80g/m²)
> Multi Purpose Tray: to extend the range of media your
printer can accommodate (capacity 100 sheets (80g/m²)
or 50 envelopes)
> One of the following can be added:
(a) 8MB Flash DIMM: to allow the storage of additional
fonts or bar codes for the PG L26, PG L26 Special
(b) 16MB Flash DIMM: to allow the storage of additional
fonts or bar codes for the PG L26, PG L26 Special
(c) PostScript PS level 3 DIMM: to add PostScript
emulation to the PG L26 Special. Cannot be added in
conjunction with extra flash memory.
(d) The PG L26 Special PS option is supplied as 2
DIMMs: a PS DIMM and a 16MB RAM DIMM. When
fitted into a basic PG L26 Special (i.e. one with no
memory upgrade already fitted) the PS DIMM will
expand into the 16MB RAM DIMM in order to work,
and the amount of memory available for general
operation of the printer will therefore not change. It
will remain at 16MB, which is the printer's base
memory.
(e) If you require to install a PS upgrade into a
PG L26 Special which already has a memory upgrade
installed, discard the 16MB RAM DIMM which ships
with the PS option and install only the PS DIMM. The