62
3
8
Completing the setting.
1 Press the + or – button to choose “
Finish
”.
2 Press the OK button to complete the
setup screen.
Programmed settings will be applied and the
screen will return to the preset number
selection menu. If the On/Off setting is set
to On,
and
(Alarm indicator) will
appear on the display.
If you press the 0 button without pressing
the OK button, all settings will be canceled
and it will return to the preset number
selection menu.
aAlarm Playback indicator
When setting other preset numbers, repeat
Steps 4 through 8.
9
Press the STOP button to close the
menu.
Alarm Playback Function
Alarm Playback Function (Alarm)
..................................................................................................................................................
Notes
• If “Everyday” is selected, the alarm will sound at the scheduled time every day unless alarm playback is canceled.
•
The alarm will sound for five minutes and then stop. Even if a file is selected for Alarm Playback, it will
not be automatically played when the alarm sounds.
• If three alarm playback have the same starting times, “Preset 1” has the highest priority and "Preset 3"
has the lowest.
•
If the recorder is in use or if operations are being performed at the scheduled time, the Alarm Playback
function will not be available.
•
The alarm will sound at the scheduled time even if the power is turned off or the recorder is set to Hold mode. The
recorder begins to play the selected file when you press any button, and stops playing when you press the STOP button.
•
If the selected file is erased, file playback will not be performed and only the alarm will sound.
• If the starting times for timer recording and alarm playback are set for the same time, timer recording will have priority.
• If the recorder is formatted (☞ P74), alarm data will also be erased, so you won't be able to set an alarm. If the alarm
data has been deleted, connect the recorder to a computer and copy the alarm sound data to the recorder (☞ P117).
9
2
1