Olympus DS-40 Microcassette Recorder User Manual


 
106
7
Disconnecting from Your PC
1
Click the on the task bar
located at the lower-right
corner of the screen. Click
[Safely Remove Hardware].
The drive letter will differ
depending on the PC being
used.
2
Disconnect the USB cable.
Connecting to Your PC
..................................................................................................................................................
Notes
NEVER disconnect the USB while the record/play indicator light is flashing. If you do, the data will be
destroyed.
When the recorder is connected to a PC, the power will be supplied from the USB cable.
Refer to the users manual for your PC regarding the USB port or USB hub on your PC.
Be sure that you connect the USB cable either directly to the USB port on your PC or the self-power (AC
adapter connection) USB hub.
Be sure to push the cable connector all the way in. Otherwise, the recorder may not operate properly.
Cancel Hold mode.
Connecting to Your PC
1