Olympus DS-40 Microcassette Recorder User Manual


 
78
4
Changing Power Save (Power Save)
Changing Power Save
If the recorder is on and stops for 10 minutes or longer (default), the display shuts off and it
goes into power save mode. You can set the time to enter power save from among 5 min,
10 min, 30 min, 1 hour, and Off.
1
While the recorder is stopped, press
the MENU button for 1 second or
longer.
The menu opens (
P91,93).
2
Press the + or button to choose
Power Save.
3
Press the OK or 9 button.
The power save setup process begins.
4
Press the + or button to choose
between 5 min 10 min”“30 min”“1
hourand Off.
If the power save mode is set to OFF, the
recorder will not switch over to the power save
mode. Leaving the recorder in such a condition
will result in the rapid consumption of batteries.
5
Press the OK button to complete the
setup screen.
If the 0 button is pressed, the setting will
be canceled and it will return to the menu.
6
Press the STOP button to close the
menu.
You can exit power save mode by pressing any button.
5
6
1
2
3
4