Olympus P-330 Printer User Manual


 
• The printer may be malfunctioning.
Check the indicators of the printer or the error
messages of the computer.
If printer does not start printing in 5 minutes after
print paper is installed when there is nothing
wrong with the printer or computer, turn off the
printer and turn it on again. Then try printing
again. It may take more than 5 minutes when you
set to print many copies.
• The hard disk space is not enough.
Check the hard disk. If there is not enough space,
increase the space enough for the driver software.
• In the [Spool Settings] window, [Enable bi-
directional support for this printer] is selected (for
Windows 95/98).
Select [Disable bi-directional support for this
printer]. In this setting, the print monitor is not
displayed and the high speed print mode is
disabled.
Cannot install from the CD-ROM
• The hard disk free space is not enough.
Check the hard disk. If there is not enough space,
increase the space enough for the driver software.
For Windows 95/98/3.1, Macintosh
42