Filter
Top Products
Note: Specifications subject to change without notice.
6-2 Specifications
947294 DaqBoard/500 Series
Signal to Noise
and Distortion:
S/(N+D) 73 dB min. @ gain = 1
Total Harmonic
Distortion:
80 dB (typical) @ gain = 1, measured to 5th harmonic
Full Power
Bandwidth:
1 MHz
Input Impedance
Shunt Res. to
Ground:
10 M ohm
Shunt
Capacitance:
28 pf
Overvoltage
Protection:
±25 V
Acceptable
Operating Limit:
Signal Plus Common Mode: ±12 V
Gain/Channel
Selection:
176 element
Analog Input Triggering/Clocking
Clock Sources: o on-board programmable pacer
o user defined external TTL
External Clock
Input Latency:
o 5us max
Trigger Sources Stop Sources
o software command
o External (TTL)
o software Analog as follows:
• above level
• below level
• rising above level
• falling below level
• inside window
• outside window
o software command
o software Analog as follows:
• above level
• below level
• rising above level
• falling below level
• inside window
• outside window
• scan count
External TTL
Trigger Latency:
5us max
Software Analog
Trigger Latency
One scan period max