Filter
Top Products
9
(11) Insert a bushing into the AC enclosure
(it is not critical that this bushing line up
precisely with the FW-SP-ACA); if exible
cable is used instead of an enclosure,
appropriate strain relief is required.
Screws (included) secure the FW-SP-ACA to
an FX
FW-SP-ACA slides down FX slots
Figure 7: Top view of FW-SP-ACA installed
on an FX
(10) Route the FW-SP-ACA
wires through to the AC Wiring
Compartment and to the battery lugs
(12) Secure the surge protector’s wiring in the appropriate locations and replace the various plastic
covers as per the wiring instructions on page 16.