Filter
Top Products
FW-SP-ACA
The FW-SP-ACA consists of an FW-ACA with an included surge protector and is installed onto an
FX Series Inverter/Charger.
Figure 4: FLEXware Surge Protector-ACA
LEDs
Underside screw secures
FW-SP-ACA to FX
Phillips screw secures
FW-SP-ACA bracket and
surge protector board to
the FW-SP-ACA
Underside screw secures
FW-SP-ACA to FX
Procedure
Turn o the system’s DC, AC IN, and AC OUT breakers (if available, use BYPASS mode to power any
loads).
Tools Required to Install: Purpose:
• Slotted screwdriver • Wiring to the AC wiring block
• Phillips screwdriver • Remove and install covers
• 13 mm socket (torque ratchet) • Securing wires to FX DC terminals
• Utility knife • Removing plastic knockouts
• 4 mm Allen wrench • Removing and installing FX M5 hex bolts
6