Filter
Top Products
(7) Remove the appropriate knockouts for
the individual power application. Note that
knockouts should be scored rst with a utility
knife and then removed. The dual, concentric
knockout on the back o ers openings for the
FW500, FW1000, PS2 and PS4 AC enclosures.
(9) The FW-SP-ACA slides onto the FX in
the same location as the now removed AC
Conduit Plate and secures to the FX with its
own factory-supplied screws in the same
location as the removed M5 hex bolts.
Figure 6: Preparing and installing the FW-SP-ACA onto an FX
(6) Remove the cover from the FW-SP-ACA
(secured with two Phillips screws)
8
(8) Remove any AC wires from the FX AC Wiring Block
by loosening the slotted screws. These wires will be
installed through the FW-SP-ACA.