Filter
Top Products
168
Setting Your Machine
No. Parameter Setting Comments
000 Print Fax Parameter List Stop Prints the Fax Parameter List.
Start
001 Contrast (HOME) 1 (Lightest) Setting the home position for the CONTRAST.
——
4 (Normal)
——
7 (Darkest)
002 Resolution (HOME) STD Setting the home position for the RESOLUTION.
Fine
S-Fine
003 Original (HOME) Text Setting the home position for the ORIGINAL.
Txt/Pht
Photo
004 Stamp (HOME) Off Setting the home position for the STAMP.
On To select the stamp function when document is stored in memory, see Fax
Parameter No. 028 (Stamp At Memory XMT).
005 Memory (HOME) Off Setting the home position for the MEMORY.
On
006 Dialing Method Tone Selecting the dialing method.
Pulse
007 Header Print Inside Selecting the printing position of the header.
Outside Inside : Inside TX copy area.
No Print Outside : Outside TX copy area.
No Print : Header is not printed.
008 Header Format Logo, ID Selecting the header format.
From To
009 RCV’D Time Print Invalid Selecting whether the machine prints the received date & time, remote ID,
Valid percentage of reduction and page number on the bottom of each received
document.
012 Comm. Journal (HOME) Off Selecting the home position of printout mode for COMM. Journal Off/Always/
Always Inc Only.
Inc Only Off : Does not print
Always : Always prints
Inc Only : Prints only when communication has failed.
013 Auto JRNL Print Invalid Selecting whether the machine prints the journal automatically after every
Valid 200 transactions.
014 File Accept Report Invalid Selecting whether the machine prints the file acceptance journal.
Valid If you set this parameter to valid, a journal will be printed after any memory
communication.
017 Receive Mode Manual Setting the reception mode to automatic or manual.
Auto
(Below table are including G3 Facsimile function parameters.)
Fax Parameter Table
No. Parameter Setting Comments