Filter
Top Products
27
Facsimile
Features
■ Print Reduction Setting
■ Substitute Memory Reception
Transmitted Document Received Document
Oversized documents
Reduce within paper
size
If the recording paper runs out,
jams, or if the toner runs out
during reception, the machine
automatically starts receiving
documents into its image data
memory. Stored documents are
printed automatically after
replenishing the recording
paper, or toner.
(See notes 2 and 3)
NOTE
2. If the memory overflows, the machine will stop receiving, and release the communication line.
The document(s) stored in the memory up to that moment will print.
3. If you wish to turn off the substitute reception function, change the setting of Fax Parameter No. 022
(Substitute RCV) to "Invalid". (See page 169)
Automatic Reduction
Based on the document length, your machine will automatically
calculate the suitable reduction ratio (70% to 100%).
Set Parameter No. 024 (Print Reduction) to "Auto". (See page
169)
Fixed Reduction
Pre-determine the reduction ratio from 70% to 100% in 1% steps.
a) Set Parameter No. 024 (Print Reduction) to "Fixed".
b) Set Parameter No. 025 (Reduction Ratio). (See page 169)
Ex: A4 to A4 96%
A4 to Letter 90%
Letter to Letter 96%
Legal to Letter 75%
AFRICA
Message In Memory
1
When the machine completes the
memory reception, and there is no
recording paper or toner, an
message will appear on the display.
Replenish the recording paper, or
the toner.
The machine will automatically
start printing the document(s)
stored in memory.
2
Sending Station
(Letter or A4 Originals)
Duplex Print
Duplex Print Fax Parameter No. 095 (Duplex Print) set to:
• Duplex Print = Valid (Default Position is "Invalid")
■ Duplex Print