Filter
Top Products
11
Installation
Instructions
How to install and connect the unit
(continued)
6 Connect the rear panel connectors.
Anchor the AC adaptor cable in place using the cable clamp.
Cable clamp
Strap part
LAN cable
LAN cable
Interface cable
Interface cable
Video output
cable
Coaxial cables
AC adaptor cable
AC adaptor cable
[AW-HE60H]
[AW-HE60S]
Square hole (one at either side)
Square hole (one at either side)
Tab (one at either side)
Tab (one at either side)
Screw for cable cover (M3 screw)
(with flat washer, spring washer)
Screw for cable cover (M3 screw)
(with flat washer, spring washer)
pq How to secure the AC
adaptor cable
1 Loosely secure the cable
clamp.
2 Fasten the cable clamp.
Loosely secure the cable
clamp in the area shown
above.
Take hold of the strap part, slide
the cable clamp until it stops
moving, and then secure it tightly.
7 Attach the cable cover.
p Fit the two tabs on the cable cover into the square mounting hole at either side of the rear panel.
p Secure the cable cover using the screw (M3 20 mm) provided.
Screw diameter Clamping torque
M3 0.78 N · m {8 kgf · cm}
p Engage the tabs on the cable cover so they fit into place perfectly, and check that the cover is not rickety.
Note