6
Getting Started
Read Me First
2. An FCC compliant telephone cord and modular plug is
provided with this equipment. This equipment is designed to
be connected to the telephone network or premises wiring
using a compatible modular jack which is Part 68 compliant.
See Installation Instructions for details.
3. The REN is used to determine the quantity of devices which
may be connected to the telephone line. Excessive RENs
on the telephone line may result in the devices not ringing in
response to an incoming call. In most, but not all area, the
sum of RENs should not exceed fi ve (5.0). To be certain of
the number of devices that may be connected to a line, as
determined by the total RENs, contact the local telephone
company.
4. If your telephone equipment cause harm to the telephone
network, the telephone company will notify you in advice that
temporary discontinuance of service may be required. But
if advice notice isn’t practical, the telephone company will
notify the customer as soon as possible. Also, you will be
advised of your right to fi le a complaint with the FCC if you
believe it is necessary.
5. The telephone company may take changes in its facilities,
equipment, operations or procedures that could affect the
operation of the equipment. If this happens the telephone
company will provide advance notice in order for you to
make necessary modifi cations to maintain uninterrupted
service.
6. If trouble is experienced with this equipment, for repair or
warranty information, please contact Panasonic Corpora-
tion of North America at DIAL TOLL FREE 1-800-LAPTOP5
(1-800-527-8675). If the equipment is causing harm to the
telephone network, the telephone company may request that
you disconnect the equipment until the problem is resolved.
7. There are no user serviceable parts contained in this equip-
ment.
8. This equipment may not be used on coin service provided
by the telephone company. Connection to party lines is sub-
ject to state tariffs.
9. The Telephone Consumer Protection Act of 1991 makes it
unlawful for any person to use a computer or other electron-
ic device to send any message via a telephone fax machine
unless such message clearly contains in a margin at the top
or bottom of each transmitted page or on the fi rst page of the
transmission, the date and time it is sent and an identifi ca-
tion of the business or other entry, or other individual send-
ing the message and the telephone number of the sending
machine or such business, other entity, or individual. In
order to program this information into your fax software, you
should refer to the manual of the Fax software being used.
10. According to the FCC’s electrical safety advisory, we rec-
ommend that you may install an AC surge arrestor in the
AC outlet to which this equipment is connected. Telephone
companies report that electrical surges, typically lightning
transients, are very destructive to customer terminal equip-
ment connected to AC power sources and that this is a
major nationwide problem.
“Caution : To reduce the risk of fi re, use only No.26 AWG or
larger (e.g., 24 AWG) UL listed or CSA certifi ed telecommunica-
tion line cord.”
“ATTENTION : Pour réduire le risque d’incendie, utiliser unique-
ment des conducteurs de télécommunications 26 AWG ou de
section supérieure (p.ex. 24 AWG) UL énumérés ou CSA certi-
fi é.”
16-M-1
UL1604-conforming model. (The model which has description of
“UL1604” in the bottom of the computer.)
THIS EQUIPMENT IS SUITABLE FOR USE IN CLASS I, DI-
VISION2, GROUPS A, B, C, AND D OR NON-HAZARDOUS
LOCATIONS ONLY.
WARNING-EXPLOSION HAZARD-SUBSTITUTION OF COM-
PONENTS MAY IMPAIR SUITABILITY FOR CLASSI, DIVI-
SION2.
When connecting and using a device manufactured by a third
party, enquire to the manufacturer as to whether the device
suits CLASS1, DIVISION2.
33-M-1-1
USA Only: Disposal may be regulated in your community
due to environmental considerations. For disposal or recy-
cling information, please visit Panasonic website:
http://www.panasonic.com/environmental or call
1-888-769-0149
65-M-2
<For USA-California Only>
This product contains a Coin Cell Lithium Battery
which contains Perchlorate Material - special handling
may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate/
38-M-1
For Used in Motor Vehicle /Pour L’utilisation Dans Un Véhi-
cule Motorisé
Warning: Notebook Computer may be installed in a motor
vehicle and visible to the driver only if used to support vehicle
related functions such as vehicle information, system control,
rear or side observation and navigation. If used for entertain-
ment purpose, such as television reception or video play, it
must be installed to the rear of the driver’s seat where it will
not be visible, directly or indirectly, to the operator of the motor
vehicle. Check with individual state/provincial laws to determine
lawful use of this product while operating within a motor vehicle.
Avertissement : L’ordinateur bloc-notes peut être installé dans
un véhicule motorisé et dans le champ de vision du conduc-
teur uniquement en tant que dispositif d’aide aux fonctions du
véhicule, comme par exemple pour fournir des informations sur
le véhicule, comme dispositif de contrôle de système, pour l’ob-
servation à l’arrière ou sur les côtés du véhicule, ainsi que pour
fournir de l’information routière. Pour toute utilisation à fi n de
divertissement, comme par exemple pour regarder la télévision
ou jouer à des jeux vidéo, il doit être installé à l’arrière du siège
du conducteur, en un emplacement où il ne sera pas visible, ni
directement ni indirectement, pour le conducteur du véhicule
motorisé. Vérifi ez les lois fédérales et nationales qui régissent
l’utilisation légale de cet appareil à l’intérieur d’un véhicule mo-
torisé.
35-M-1
External Antenna
FCC RF Exposure Warning:
This equipment is provided with external antenna
connector(s) for connection to optional Car Mounter or Port
Replicator for mobile external mounted antenna(s). Exter-
nal antenna(s) must be professionally installed and cannot
exceed recommended maximum antenna gain as described
in individual provided supplement instructions for wireless
transmitters.
The maximum allowable antenna gain for the external WWAN
base whip antenna for the cellular band is 7.0 dBi and PCS
band is 3.5 dBi. Also, user must maintain minimum 20 cm
spacing between external antenna(s) and all person’s body
(excluding extremities of hands, wrist and feet) during wire-
less modes of operation.
32-M-1-1