31
Appendix
*1
1
MB
= 1,048,576 bytes /1
GB
= 1,073,741,824 bytes
*2
Memory size of the factory default depends on the model.
You can physically expand the memory up to 8
GB
, but the total amount of usable memory available will be less depending on
the actual system confi guration.
*3
A segment of the main memory is allotted automatically depending on the computer’s operating status. The size of the Video
Memory cannot be set by the user.
*4
1
MB
= 1,000,000 bytes / 1
GB
= 1,000,000,000 bytes. Your operating system or some application software will report as fewer
MB
/
GB
.
*5
A 16,777,216 color display is achieved by using the dithering function.
*6
Display may be impossible using some connected external displays.
*7
Only for model with wireless LAN.
*8
Only for model with Bluetooth.
*9
Only for model with GPS.
*10
Only for model with wireless WAN.
*11
Only for model with 2nd LAN.
*12
Only for model with modem.
*13
Only for model with TPM
For information on TPM, refer to the Installation Manual of “Trusted Platform Module (TPM)” by the following procedure.
Click
(Start) and input “c:\util\drivers\tpm\index.hta” in [Search programs and fi les] and press
Enter
.
*14
This slot is compatible with High-Speed Mode. Operation has been tested and confi rmed using Panasonic SD/SDHC/SDXC
Memory Cards with a capacity of up to 64
GB
. Operation on other SD equipment is not guaranteed.
*15
Only for model with Smart Card slot.
*16
Does not guarantee operation of all USB-compatible peripherals.
*17
Only for model without 2nd LAN.
*18
Does not guarantee operation of all HDMI-compatible peripherals.
*19
Only for model with IEEE 1394a interface.
*20
Only for model with Touchscreen.
*21
Only for model with Fingerprint reader.
*22
Only for model with Web Camera.
*23
<Only for North America>
The AC adaptor is compatible with power sources up to 240
V
AC adaptor. This computer is supplied with a 125
V
AC compat-
ible AC cord.
20-M-2-1
*24
Measured with LCD brightness : 60 cd/m
2
Varies depending on the usage conditions, or when an optional device is attached.
*25
Only for model with 2nd Battery.
*26
Varies depending on the usage conditions, CPU speed, etc.
*27
Approx. 0.5
W
when the battery pack is fully charged (or not being charged) and the computer is off.
<When using with 115
V
AC>
Even when the AC adaptor is not connected to the computer, power is consumed (Max. 0.2
W
) simply by having the AC adaptor
plugged into an AC outlet.
*28
Rated power consumption.
23-E-1
*29
Do not expose the skin to this product when using the product in a hot or cold environment. (
page 10)
When using in hot or cold environment, some peripherals may fail to work properly. Check the operation environment of the
peripherals.
Using this product continuously in a hot environment will shorten the product life. Avoid use in these types of environments.
When using in low temperature environment, startup may become slow or battery operation time may become short. The com-
puter consumes power when the hard disk is warming up during startup. Therefore, if you are using battery power and the
remaining power is low, the computer may not start up.
*30
When reinstalling Windows using the data of the recovery area on the hard disk, you can select the OS to be installed (either
Windows 7 (32-bit) or Windows 7 (64-bit)). An OS that has been installed at the time of purchase or an OS that has been in-
stalled using the hard disk recovery function or the recovery disc can be supported.
*31
Must be installed before use.
*32
Perform on the recovery partition. (If this software can not be performed on the recovery partition, perform from the recovery
disc)
*33
For information on Wireless Manager, refer to the “Supplementary Instructions for Wireless Manager mobile edition 5.5” by the
following procedure.
Click (Start) and input “c:\util\wlprjct\Supplementary Instructions.pdf” in [Search programs and fi les] and press
Enter
.
*34
These are speeds specifi ed in IEEE802.11a+b+g+n standards.
Actual speeds may differ.
*35
Available when set to “WPA-PSK”, “WPA2-PSK” or “none”.
*36
Only available when HT40 enabled by the computer and access point which associated supports HT40.