Filter
Top Products
25
Using Dual-Display Mode
1
In [Start] - [Settings] - [Control Panel], select [Display]
When an external display is connected, it is possible to use both the LCD of the com-
puter (i.e., internal LCD) and the external display as an extended display domain with the
Dual Display Mode.
It is possible to drag a window from the internal LCD to the external display.
Setting Dual-Display Mode
Using an External Display
2
Add the check mark for [Set Dual-Display] in [Settings]
- [Advanced] - [NeoMagic]
3
Restart the computer
The display ask you to restart the computer, press [Yes].
4
Set the Screen area and Colors
This step is to set the screen area and colors for the internal LCD and
external display. The internal LCD and external display are each assigned
a monitor number ([1] or [2]). For the internal LCD [1] and external display
[2], click on each of them to set the screen area and colors. Refer to page
26 for information on the possible values that can be set.
To confirm the monitor numbers:
By clicking and holding down on the monitor icon in the Display Proper-
ties dialog box, the monitor number corresponding to the icon will be dis-
played.
5
Set the Position of the Extension Display (External Dis-
play [2])
Drag and drop the monitor icon of the external display [2]. Operations will
be facilitated when the monitor number matches the actual arrangement
position of the external display.
6
Select [OK]
Depending on the software application, there are some applica-
tions (Panasonic Hand Writing etc.) that cannot be used in the Dual-
Display Mode.
When the button to maximize a window is pressed, one of the dis-
plays will show the maximized display.
A window that has been maximized cannot be moved to the other
display.
NOTE
(To next page)