Filter
Top Products
9
Security Measures
Situation Function to use Reference
Supervisor Password below
User Password
Coffee Break Password page 12
Prevent operation by
using a floppy disk
Use security locks
You do not want your computer to be used without permission
Same as above, but while you’re away temporarily
You want to prevent theft or damage to data by using a floppy disk
You want to prevent theft of your computer
To prevent unauthorized access of your computer, the various security measures are provided below.
You should set your "Supervisor Password" and "User Password" (The User Password
can only be set when the Supervisor Password has been set).
Without the password, access to your computer is impossible.
Starting up when the password is set
When you do not want your computer to be used without permission
* If you are starting from the suspend mode, if after
three attempts the correct password is not input,
or if no password is entered for about a minute,
the computer returns to the suspend mode.
Over three incorrect attempts,
If the correct password is input,
Will Start
Will Not Start*
(Power off)
Upon entering your Supervisor
Password or User Password
and pressing Enter .
"Names and Functions of Parts"
page 13
If entering the Setup Utility with Supervisor Password
You can not register [Advanced] menu and some items in [Security] menu.
When [User Password Protection] has been set to [Protected], you can not regis-
ter the User Password.
F9 does not work.
You can register all items of the Setup Utility ( page 33).
If entering the Setup Utility with User Password