Filter
Top Products
39
Technical Information
The network connection may be severed when entering the ECO mode and suspend
(hibernation) mode. When network or communication software is to be used, set
[System standby], [Turn off monitor] and [Turn off hard disks](in [Start] - [Settings] -
[Control Panel] - [Power Management]) to [Never].
When the power saving function is running, communications software may malfunc-
tion. For example, communications may be halted if the suspend (hibernation) mode
is activated. The computer must be restarted if one of these modes is entered during
data communications.
Be sure that the computer enters the ECO mode or suspend (hibernation) mode after
the communications software is closed.
Network / Communication Software
1
Double click on the task bar.
2
Select [Option] – [Properties].
3
Check [Playback], and add the check mark for [ZV Port].
4
Press [OK].
5
Delete the check mark for [Mute] at [ZV Port].
6
Click in the top of right corner of the window.
Using the ZV Card
Hard Disk
When application software or an operating system (OS) incompatible with FAT32 is to be
used, it is necessary to change FAT32 to FAT16, after saving all necessary files, by using
the FDISK command. However, we cannot recommend this when the user is unfamiliar
with the OS.
The FAT16 file system can only be set up to 2GB for one partition.
NOTE