Filter
Top Products
17
Battery Power
Panasonic Battery Monitor
It is possible to display the current battery status and the remaining battery power by running
the Panasonic Battery Monitor.
Select from the taskbar
1
2
Click [Detail]
Remaining battery power
Estimated time until fully charged during Power On
Estimated time until fully charged during Power Off
Battery voltage
Battery current
Average current for the most recent one minute
Battery capacity (fully charged)
Battery temperature(degree)
Battery type
Battery capacity (specified)
Battery voltage (specified)
The deviations for the estimated time can occur depending on the condition of the
battery.
There are cases [0] (indicating a full charge) may be shown for the [Estimated Time
until fully charged] even if the remaining battery power is about 97% (e.g., when un-
plugging then plugging the AC adapter above 95%).
When the Panasonic Battery Monitor is being displayed, the System standby (Suspend
timeout function, [Power Schemes] in [Control Panel] - [Power Management]) will not
work.
NOTE
Battery Status
AC: AC adapter connected (fully charged)
AC-Charging: AC adapter connected (charging)
Battery-Discharging: No AC adapter (discharging)
This program will be closed after removing the check
mark, then clicking [OK]