Filter
Top Products
33
Setup Utility
press F2
To run the Setup Utility, you
need to restart your computer.
Press F2 while [Press <F2> to enter SETUP] is displayed.
The Setup Utility will not run if F2 is not pressed soon after the computer starts.
In this case, you need to restart your computer.
If [Enter Password] is displayed, enter your password.
When entering the User Password, if the [Set User Password], [Set Supervisor
Password] and [User Password Protection] have been set, [Advanced] and [Secu-
rity] menus will not be displayed on the main screen.
To display the [Advanced] and [Security] menus:
1
Restart the computer and press F2 when [Press F2 to enter Setup] is displayed.
2
When [Enter Password] is displayed, enter the Supervisor Password.
For more details, on-line help is available; press F1 .
Running the Setup Utility
Press <F2> to enter SETUP
Upon seeing
this message
Key Operations
F1 :To display the corresponding “help” file.
Enter :To display sub-menu.
Esc :To display [Exit] menu.
:To move among the menus.
:To move among the items.
F5 F6 :To move among the values.
F9 * :To set default settings for the operating system.
F10 :To save the settings and exit.
NOTE
NOTE
* When starting up the Setup Utility with the User Password, this key is not available.
Closing the Setup Utility page 38