Filter
Top Products
9
Getting Started
(This book)
4 Insert the battery pack
1 Turn your computer over.
2 Slide the latch, and then without releasing it, slide and remove the battery pack
cover.
First-time Operation
Read the steps below to help you learn what parts are included, and to gain an understanding of
some basic computer-related operations.
1 Confirm the inclusion of all parts
Make sure the parts shown in the figure have been supplied. If any of these items are
missing or is not working properly, contact Panasonic Technical Support.
Label-side down
Cover
Model No : CF-AA1639A
AC Adaptor .........1
The Product Key or Product ID is necessary during the setup procedure for Windows
(
pages 11, 26). Write down the number shown on the Certificate of Authenticity
located on the bottom of the computer in the Customers Record section on page 2
of this manual.
2 Write down the Product Key or Product ID
Model No :CF-VZSU14
AC Cord ...............1
Battery Pack........1
Modem Telephone
Cable ...................1
SuperDisk Drive .................... 1
Windows
®
Book ....................1
Product Recovery CD-ROM
2
3
Windows 98
Windows NT
Windows 2000
Operating
Instructions.........1
Model No :CF-VFS712
The devices included may differ for different models.
Using a SuperDisk Drive
(
"SuperDisk Drive")
3 Read the LIMITED USE LICENSE AGREEMENT ( page 28)
Before removing the seal covering the power switch, read the LIMITED USE LI-
CENSE AGREEMENT.
Latch
3 Insert the battery pack into the computer with the label-side down.
CAUTION
Be sure the battery pack is properly connected to the connector.
Do not allow the battery connector to touch any portion of the computer.
The computer may not operate properly.