Filter
Top Products
6.3.7. Processing of MODEM Cable and LAN Cable
LAN Cable
MODEM Cable
PET Tape
Insert LAN cable
previously
The cable is
processed with the
boss between ribs
USB Sheet
The USB sheet
is put and the
cable is held
Standard
The cable
must enter
in the set of
3-5mm
The state that the tension hangs is NG
Give slack
to the drawing
out part
6.3.8. Processing of USB Cable
Do not run aground in the boss
USB Board
PET Tape
PET Tape
0
2mm 0 2mm
The Cable must not enter under the
HDD unit
Do not run aground in the boss
HDD Unit
Boss
Process the line to 3 cables in parallel based on
the difference of the concave part of the bottom
case
Order is USB, modem, and LAN cable from this
side
6.3.9. Screw tightening procedure of Each Unit
When serving, the screw tightening is executed according to the undermentioned procedure.
1. Screw tightening of top case
1-1. DXQT2+E6FNL(K:N12) is tightened. No.1 to No.3
1-2. DXQT26+D8FCL(L:N15) is tightened. No.4 ,No.5
1-3. DXHM0056ZA(J:N6) is tightened. No.6
Screw(L)
Screw(J)
Screw(K)
Screw(K)
Screw(J)
Screw(K)
40