Filter
Top Products
6.2.3. Removing the HDD
Preparation : perform the section 6.2.1. 6.2.2. first.
1. Remove the 2 screws (C) and then remove the HDD cover.
Screw (C):DFHE5025XA(N501)
Screw(C)
Tape
HDD Cover
2. Lift up the HDD unit and remove FFC connector and then
remove the HDD unit.
3. HDD is taken out of the HDD case.
Note:
Please do not bend pins of the HDD connector, at the
time of removing HDD and FFC connector.
HDD
HDD FFC
FFC Connector
HDD Unit
HDD Case
6.2.4. Removing the Top Case
Preparation : perform the section 6.2.1. , 6.2.2. first.
1. Remove the 7 screws (D) and 5 screws (G).
Screw (D):DXHM0039ZA(N5)
Screw (G):DXHM0057ZA(N7)
Screw(G)
Screw(G)
Screw(D)
Screw(D)
Screw(D)
Screw(D)
Screw(G)
Screw(G)
Screw(G)
2. Remove the speaker cable from the connector (CN26).
3. Remove the side cover (R) as slide it to this side.
4. Remove the 1 screw (J), 3 screws (K) and 2 screws (L) from
top case and then remove the top case.
Screw(J):DXHM0056ZA(N6)
Screw(K):DXQT2+E6FNL(N12)
Screw(L):DXQT26+D8FCL(N15)
Screw(L)
Screw(L)
Screw(K)
Screw(K)
Screw(J)
Screw(K)
Side Cover(R)
CN26
Speaker Cable
29