Filter
Top Products
42
Troubleshooting
Troubleshooting (Basic)
Starting Up
Other startup
problems.
Press
+
(F9) in the Setup Utility (
Reference
Manual “Setup Utility”) to return the Setup Utility set-
tings (excluding the passwords) to the default values.
Start the Setup Utility and make the settings again.
Remove all peripheral devices.
Check to see if there was a disk error.
A
Remove all peripheral devices including an external
display.
B
Click (Start) - [Computer] and right-click [Local
Disk (C:)], and click [Properties].
C
Click [Tools] - [Check Now].
A standard user needs to enter an administrator
password.
D
Select the option in [Check disk options] and click
[Start].
E
Click [Schedule disk check] and restart the computer.
A
Click [start] - [My Computer] and right-click [Local
Disk(C:)], and click [Properties].
B
Click [Tools] - [Check Now].
C
Select the option in [Check disk options] and click
[Start].
Start the computer in Safe Mode and check the error
details. When the [Panasonic] boot screen disappears
*1
at startup, press and hold + (F8) until the Win-
dows Advanced Options Menu is displayed. Select the
Safe Mode and press (Enter).
*1
When [Password on boot] is set to [Enabled] in the [Se-
curity] menu of the Setup Utility, [Enter Password] ap-
pears after the [Panasonic] boot screen disappears. As
soon as you enter the password and press (Enter),
press and hold + (F8).
Shutting down
Windows does not
shut down.
Remove the USB device.
Wait one or two minutes. It is not a malfunction.