Filter
Top Products
10
Getting Started
Names and Functions of Parts
Using the Tether
The tether prevents the stylus (included) from falling accidentally. It can be attached to the
stylus holder ( page 11).
12
Tether
Attaching the Tether
Before Using the Stylus
Attaching or Removing the Stylus Holder
The computer is supplied with the stylus holder attached to the right side of the internal display.
If you want to attach the stylus holder to the left side of the display, use the following method.
Open the display slightly, and stand the computer on its side. (Refer to the illustration on the
left.)
CAUTION
Do the following before attaching or removing the stylus holder.
• Turn off the computer.
• Remove the battery pack and AC adaptor.
• Remove the stylus from the stylus holder.
When attaching or removing the stylus holder, work in a level place.
To attach or remove the stylus holder, use a no. 0 precision Phillips screwdriver.
Using the screwdriver, remove the screws (A, B, C) from the right side of the display.
This detaches the stylus holder (D).
Reattach the screws (A, B, C) to the right side of the display.
Turn the computer over, so that the left side of the display is at the top.
Using the screwdriver, remove the screws (A, B, C) from the left side of the display.
• Be careful not to remove the screw (E).
Attach the stylus holder (D) removed in step to the left side of the display, and fasten the
screws (A, B, C).
CAUTION
Do not carry the computer by gripping the tether.