Panasonic D10000 Projector User Manual


 
60/62
Hexadecimal 02h *1 FEh FEh 03h
Remarks STX ID Command Option ETX
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *5 FEh FEh *2 *3 *4 — *15 *16 *17 03h
STX ID Parameters
Acceptability
SECURITY STNDBY NO SIGNAL SHUTTER TEST PATTERN REMOTE2
Yes Yes Yes Yes Yes Yes
Parameters (*2—*17)
Bit Name Description Condition of Clear Bit
0 Temperature warning (IN) Intake air temperature is the specific value or higher. It is less than the specific
value.
1 Temperature warning (OPT) Optical module (DMD surroundings) temperature is the
specific value or higher.
It is less than the specific
value.
2 Temperature warning (OUT) Exhaust air temperature is the specific value or higher. It is less than the specific
value.
3 Low temperature warning (OPT) Optical module (DMD surroundings) temperature is less than
the specific value.
It is the specific value or
higher.
4 Temperature error (IN) Intake air temperature is the specific value or higher. It is less than the specific
value.
5 Temperature error (OPT) Optical module (DMD surroundings) temperature is the
specific value or higher.
It is less than the specific
value.
6 Temperature error (OUT) Exhaust air temperature is the specific value or higher. It is less than the specific
value.
7 Low temperature error (OPT) Optical module (DMD surroundings) temperature is less than
the specific value.
It is the specific value or
higher.
8 Lamp 1 operating time warning
9 Lamp 2 operating time warning
10 Lamp 3 operating time warning
11 Lamp 4 operating time warning
Lamp cumulative usage time is the specific value or longer.
12 Lamp 1 operating time exceeded
13 Lamp 2 operating time exceeded
14 Lamp 3 operating time exceeded
15 Lamp 4 operating time exceeded
Lamp cumulative usage time is the specific value or longer.
Lamp replacement
16 Lamp 1 going out
17 Lamp 2 going out
18 Lamp 3 going out
19 Lamp 4 going out
Lamp-Goes out after turning on.
20 Lamp 1 lighting failure
21 Lamp 2 lighting failure
22 Lamp 3 lighting failure
23 Lamp 4 lighting failure
Lamp ignition failure
Executes the lamp
turning on processing.
24 Lamp 1 not installed
25 Lamp 2 not installed
26 Lamp 3 not installed
27 Lamp 4 not installed
Lamp not installed, or Lamp memory read failure MAIN POWER ON after
the lamp is installed, or
Lamp memory
initialization
28 AC power supply voltage drop
warning (less than 90 V)
29 Lamp unit cover is not closed Lamp unit cover is not closed for 1 second or longer.
POWER ON after the lamp
unit cover is closed
30 —
31 —
2.151. SELF CHECK Information