31
Function
General Functions for Key Operator
No. Modes
Initial
Setting
Function
00 PAPER SIZE
Sets the paper size of each paper tray.*
CTray-1, Tray-2, Tray-3, Tray-4
Consult
your
service
technician.
NOTE
Selects the Control Panel reset time.
CNone, 30 seconds, 1 minute, 2 minutes,
3 minutes, 4 minutes
Selects the message language of the display.
CEnglish, French, Spanish
AUTO RESET TIME
LANGUAGE DEFAULT
05
Sets the paper tray for special paper (ex: colored).
CNone, Tray-1, Tray-2, Tray-3, Tray-4, Sheet
Bypass
SPECIAL TRAY 1
SPECIAL TRAY 2
NONE
NONE
Sets the paper tray for special paper (ex: colored).
CNone, Tray-1, Tray-2, Tray-3, Tray-4, Sheet
Bypass
Sets the Energy Saver mode and time.
CNone, Energy save mode, Sleep mode
Energy save mode timer : 1-120 minutes
Sleep mode timer : 1-120 minutes
ENERGY SAVER MODE
Sets the on time and off time for Energy Saver
mode.
CStart time - End time
ENERGY SAVER TIME
1 minute
Sleep
English
KEY/TOUCH BEEP
Sets the panel touch sound.
COff, Soft, Loud
Soft
01
02
03
04
06
09
10
ORIG. SET BEEP
Beep sound when original is set on the platen.
COFF, ON
OFF
Beep sound when original is set in the ADF.
COFF, ON
ORIG. SET BEEP ADF On ON
Consult
your
service
technician.
20
Sets the date & time
DATE & TIME
Monitors copy usage of each department.
(1) Copy usage of each department
(2) Copy limit of each department
(3) Copy number of each department
DEPT. COUNTER MODE
DAYLIGHT TIME
Sets daylight saving time
COFF, ON
∗
Sets user IP address
C3 digit × 4
TCP/IP ADDRESS
∗
Sets the subnet mask
C3 digit × 4
TCP/IP SUBNET MSK
∗
Sets the gateway address
C3 digit × 4
TCP/IP G/W ADDR.
ON
11
14
21
22
23
24
Making Copies
CIt is necessary to input the Key Operator ID code before changing items on
this page.
CThe Special Tray 1 and 2 are not auto-selectable in the switching mode.
∗
Not needed in copying mode, but needed when installing options for
advanced functions (see page 61) or using multi functions model.