Panasonic DP-8032 Scanner User Manual


 
64
Making Copies
Other Features
Job Memory
Five Copy Jobs can be stored in Memory
(M1 to M5) for recall at a later time.
To store a job in memory
M1, M2, M3, M4, M5
Set up the copy job
to be stored.
NOTE
JOB MEMORY mode will not be deleted even if the power switches are turned Off.
When storing a new job into a programmed memory location, the previously stored job will be
overwritten and erased.
M1, M2 can use as manual skyshot mode by setting the user function mode.
Double Exposure
From 2-Sided originals to 1-Sided 2 in 1
copies (side-by-side image).
1
• Front Side of Original
• Original Size:
Free, maximum Invoice size
• Opening the ADF
• Fit original to the Original
Guide.
Back Side
of Original
NOTE:
When opening the Platen Cover, or ADF
An incorrect position detection of the
original may occur when a strong light
shines on the glass during this mode.
An incorrect exposure may occur when
there is a Black line at the edge of the
original, or an image which the machine
interprets as a Black Pattern in this mode.
The final copy may be affected if colored
background original(s) do not have a
White edge, or if it is less than 2 mm wide.
1 When selecting the Double Exposure, it
will be displayed as "2 in 1" at Job
Settings, and "N in 1" of Function Select
Key will also be displayed.
2 Double Exposure function set by M5 key is
unable to store with other Job Memory.
Original Size:
ABC
ABC
DEF
NOTE:
When the M5 Key is used, the Double
Exposure Mode should be set to "Off" in the
Copier Settings "16 Double Exposure". (See
page 75)
Original Guide
2
Front Side
Image
Back Side
Image
Copy Size: Letter-R
Ex: Invoice-R
1
2
1
2
5
6