Panasonic DP-8032 Scanner User Manual


 
94
Problem Solving
Troubleshooting
Check Action
Unit Does Not Operate
Check if the Power Switches (Main Power
Switch on the back and Power Switch on the
Left Side of the machine) are turned ON and if
the power cord is plugged into the AC outlet.
Does the display light?
Press Energy Saver key on the control panel.
(See page 68)
Does the Energy Saver key flash (or light)
and displays are turned OFF?
Perform actions in accordance with each
message.
Does any of the U## codes and messages
appear on the display?
(U1, U4, U6, U7, U11....etc.)
Add Staples (See page 20)
Remove all jammed staples. (See page 21)
Does the Add Staples indicator and message
appear on the display?
Add paper. (See page 18)
Does the Add Paper indicator and message
appear on the display? (
)
Remove the misfed paper. (See pages 22-25)
Does the paper misfeed indicator and
message appear on the display? (
or J##)
Turn the Power Switch on the Left Side and
the Main Power Switch on the Back of the
machine to the OFF and ON. If the error code
does not clear, call your Service provider.
Does E#-## indicator and message appear
on the display?
Turn the Power Switch on the Left Side and
the Main Power Switch on the Back of the
machine to the OFF and ON.
The machine would not accept the next job
during operation, instructed job would not be
accepted for a long time period or job would
not be completed.
Light Copies
Touch the “DARKER” button.Does the exposure indicator say “LIGHTER”?
Replace the Toner Bottle.
(See pages 18, and 19)
Does the Add Toner indicator and message
appear on the display? (
)