Filter
Top Products
66
Making Copies
Other Features
■■
■■
■ Concurrent Copying
The next copy job can be reserved even if the
current copy job is not completed.
(Requires the optional HDD (DA-HD31), and
Image Memory (See page 93) to be installed)
1st job
1st job
2nd job
Reserve
Copy
2nd job
1st job
or
Select Function
■■
■■
■ Skyshot Mode
Skyshot allows copying a manuscript without
generating dark borders even if the Platen Cover,
or ADF is opened.
Two types of Skyshot modes can be selected;
Digital Skyshot Mode : The scanning area (size)
is not pre-determined.
Manual Skyshot Mode: The scanning area (size)
is pre-registered into
memory (M1 and M2) in
advance.
Digital Skyshot Mode
NORMAL
Default setting (usually select this mode).
QUALITY
∗∗
∗∗
∗
For better definition, select the Quality mode.
The default setting of Digital Skyshot Mode is “NORMAL”. In
this setting, the unit scans once.
If there are Black areas around the borders in the copies, set
the Digital Skyshot Mode to “QUALITY” to soften the dark
borders. In this setting, the unit scans twice. (See page 74)
Manual Skyshot Mode
● Set “09 Manual Skyshot Mode” in Copier Settings first. (See
page 74)
NOTE
∗
When copying the Quality mode combined with 1 2, BOOK 2, 2PAGE, N in 1, or
Double Exposure, “Quality” mode will be changed to “Normal” mode.
● An incorrect exposure may occur when there is a Black line at the edge of the original, or an
image which the copier interprets as a Black Pattern in the skyshot mode.
1
2