Panasonic DP-8032 Scanner User Manual


 
83
Function
Screen
No.
Modes Function
Initial
Setting
01/03
02/03
03/03
NOTE
The Key Operator Password is required before any changes can be made to items on this
page.
Functions 04, 09, and 10 are available when optional Hard Disk Drive (DA-HD31) is
installed.
∗∗
When function No. 12 is set, or No. 4 is change, cycle the power by turning the Power
Switch on the Left Side of the machine OFF and ON.
∗∗∗
When available with optional PS.
PRINTER SETTINGS
00 Printer Settings Print Sets the printer status printout. Start
Stop, Start
01 Job Completion Time Sets the job completion time setting. 180
1~ 999 sec.
02 Page Protection Compress automatically then printout. Off
Off, On
03 Error Page Print Sets the error page printout. On
Off, On
04 Spool Function Sets the spool function.
∗∗
On
Off, On
05 Text Print Prints text page only. On
Off, On
06 PS Configuration Print Sets the status page print of PS. Start
Stop, Start
07 Font List Print (PCL) Sets the font list print of PCL. Start
Stop, Start
08 Font List Print (PS) Sets the font list of PS. Start
Stop, Start
09 Mailbox Data Holding Sets the automatic holding function of mailbox 7 days
data.
Infinity, 1 day, 2 days, 3 days, 4 days, 5 days,
6 days, 7 days
10 Delete Mailbox Data Sets delete the mailbox data.
Before
All, Before
11 Print Queue Delete Sets authorization to delete the print queue. Key Op.
Free, Key Op. (operator)
12 AppleTalk Zone Name
∗∗∗
Inputs an AppleTalk Zone name.
∗∗
Maximum 32 characters